Caddx is Back with the SDR1 Designed specifically for FPV use with Drone racing in mind. No more deciding between a 16:9 or 4:3 camera or between NTSC or PAL, with this camera you can do settings you want. We are proud to show the latest camera from CADDX The mighty little SDR1.
Easy from the menu to switch between 16:9 & 4:3 and or NTSC & PAL. Switchable Super wide dynamic range with the best light handling in any fpv camera yet. Plus a mighty high 1200TVL resolution all coupled to a super quality CMOS sensor.
Sony Exmor-R STARVIS CMOS image sensor
16:9 4:3 Changeable
Super WDR with double scan
Designed specifically for FPV use with Drone racing in mind.
No delays, no ripple, more fluent image for high-speed racing.
Excellent night vision performance and electronic shutter
Smaller, Lighter, Clearer than other comparable cameras on the market.
Unique color design gives a fresh new look that will stand out from the crowd.
Super Wide Voltage Range: Support 5-40V input voltage.
Image Sensor: 1/2.8″ SONY Exmor-R STARVIS sensor
Horizontal Resolution: 1200TVL
TV System: NTSC/PAL (changeable)
IMAGE: 16:9 & 4:3 (changeable)
WDR: Super WDR (Double Scan)
Min. Illumination: 0.0001Lux@F1.2 (Starlight)
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Camera OSD: ADVANCE MENU
Wide Power Input: DC 5-40V
Weight: 5g (N.W.)/ 35g (G.W.)
1x Aluminum bracket
1x 5D-OSD menu board
1x FPV silicone cable (4-pin port one side, 3-pin port the other side)
1x Internal hex wrench
1x Warranty card
1x Set screws
Flip image When you change the video format from PAL to NTSC or vice versa, the image will flip. Just restart the camera then you’ll get the right image. The camera will also flip when you change the “IMAGE RATIO”.
How to change IMAGE RATIO? The camera is by default 16:9. To change image ratio from 16:9 to 4:3, please do the following steps: Enter into OSD menu VIDEO SETTING IMAGE RATIO 16:9 4:3 RETURN SAVE EXIT Then the image will flip, restart the camera, the image ratio is 4:3.
To change image ratio from 4:3 to 16:9, please do the following steps: Enter into OSD menu VIDEO SETTING IMAGE RATIO 16:9 4:3 16:9 RETURN SAVE EXIT The image will flip, restart the camera, the image ratio is 16:9. Although the image ratio of the camera is 4:3, it will show 16:9 on the OSD menu. Because it is not the original chipset setting. We add this option through software updates.
The camera is hot Since the sensor is 1200TVL and both sensor and chipset need to do double exposure, it leads to a good WDR but increases the current.