Hobbywing XRotor Micro 45A 6S 4in1 ESC
Hobbywing XRotor Micro 45A 6S 4in1 ESC Dshot1200. A powerful ESC with 32bit BLHeli capabilities.
This product is no longer in stock
Warning: Last items in stock!
The Hobbywing 4in1 XRotor Micro 45A ESC is highly integrated with the latest features & hardware designs as well as incredibly compact. Featuring 4x 45A ESCs with BLHeli_32 DShot 1200 support, two built in BECs (5V & 10V) and a module that allows the flight controller to monitor realtime battery voltage & amperage usage.
High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, Oneshot125, Oneshot42 and Multishot.
Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
The code also supports a beacon functionality and turtle mode with DShot command where the ESC will start beeping after a given time of zero throttle for finding lost models.
On board 10V &5V BEC , powering different accessories such as FC, VTX, Camera and LED lights and more.
Model XRotor Micro 45A 4in1 BLHeli32 6S
Power input 3S-6S
Con. Current 45Ax4
Burst Current: 60Ax4
BEC Output: 5V@1.5A / 10V@1.5A
Input wires: 12AWG-130mm* (Red/Black)
Output Wire: No wires but solder tabs
Connectors: XT60 (w/ Wires Soldered on) /no
Mounting holes: 30.5x30.5mm
Manual for the Hobbywing Xrotor Micro 45A 6S 4in1 ESC